Buying guide

Bottle washer quote checklist

Bottle washer quote checklist covering bottle dimensions, contamination, output, utilities and line layout.

Practical decision points

Use this guide to prepare a better bottle washer enquiry and avoid comparing machines on headline output alone. The right route depends on the container, cleaning task, production target and wider line layout.

Bottle photos or drawings, including neck finish and base shape.
Bottle height, body diameter, neck opening, material and weight.
Current bottle condition: new, dusty, returned, labelled, wet, oily or contaminated.
Required process: internal rinse, external wash, full wash, drying, label removal or combined route.
Target bottles per hour and planned production pattern.
Available power, compressed air, water, drainage and footprint.
Existing machinery before and after the washer.

Tip: send bottle photos or samples early. Small differences in bottle height, neck opening, base stability and contamination level can change the correct machine route.

Related machine routes

Automatic washing

LU-WB12 automatic bottle washer with 12 nozzles

Inline bottle washer for cleaning inner and outer bottle surfaces with conveyor integration for production lines.

Best forGlass/PET bottles

Typical outputAbout 2,800/h listed

Utilities110/220V, 0.75kW

View machine

Semi-automatic

LU-WB32 rotary small semi-automatic bottle washing machine

Compact rotary washing route for beverage and glass-bottle projects where flexibility and footprint matter.

Best forBeverage glass bottles

Typical outputUp to 2,500 BPH route

UtilitiesConfirmed at quote

View machine

Wash & dry

Full automatic 12-head bottle washing and drying machine

High-pressure water washing followed by clean-air drying for round-neck, flat and square bottle formats.

Best forPET/glass bottle shapes

Typical outputConfigured to project

UtilitiesConfirmed at quote

View machine

Returnable bottles

LU-BLR18 bottle label remover

Label-removal support for bottle recovery and returnable-bottle preparation before washing or rework.

Best for70–100mm body listed

Typical output2,000 BPH listed

Utilities4kW, 380V listed

View machine

Technical planning

Add test evidence to the quote checklist

Alongside dimensions and output, include before-and-after photos, label condition, visible residue, odour concerns, drying requirement, water supply, drainage route and any known chemical restrictions.

Cleaning validation

Set a clear pass/fail standard for washed bottles: visible residue, odour, adhesive, internal droplets, external finish and suitability for the next filling stage.

Read the validation guide

Water, utilities and drainage

Confirm supply, pressure, drainage, air, power and any water-reuse objective against the selected configuration rather than assuming a generic utility load.

Review utility checks

Returnable bottles and labels

Assess whether de-labelling, adhesive removal and rewash handling are separate stages before the bottle reaches the final washer.

Open returnable bottle guide

Guide FAQ

Planning questions to avoid vague quotes.

Which new technical guide should I read first?

Start with cleaning validation if the bottles are returned or contaminated, water and drainage planning if services or sustainability targets are unclear, and returnable bottle preparation if label removal is part of the process.

Do these guides replace a machine trial?

No. They help prepare a better enquiry, but real bottle testing is still the safer route where residue, label adhesive, bottle stability or dry-off quality could affect production.

Should unsupported performance figures be used for planning?

No. Use verified first-party specifications where available and mark unknown water, energy, output, changeover or drying figures for confirmation during quotation.